Contour Lines

I.

Contour Lines — Children's Discovery exhibit for science museums
Studio rendering
CategoryChildren's Discovery
InteractionOpen-ended, hands-on play
Standard sizeBuilt to your floor plan
Power100–240 V AC, 50/60 Hz, single phase — universal input; no step-down transformer or motor re-tap
SupplySingle unit or batch · OEM to your drawing
Lead timeStandard 3–6 weeks after deposit (confirmed per contract)
Warranty1 year, structure and control
DocumentsSpecification sheet · control diagram · spare-part list

A standard catalogue model: the dimensions, control package and finish are fixed, which is what keeps the price and the lead time predictable. Size, colour and interface language can be adapted without a new design cycle.

Ask about this model → Email us

Standard models from this range are also listed in our online store, priced in USD — see the price yourself ↗

01 / Overview

I. Purpose of the Exhibit This exhibit demonstrates the meaning of contour lines and how they are drawn through electromechanical interaction. II. Scientific Principle A contour line refers to a closed curve formed by connecting adjacent points of equal elevation on a topographic map. A contour line is obtained by connecting points on the ground with the same elevation to form a closed curve, projecting it vertically onto a horizontal plane, and then scaling it down proportionally on a map. Contour lines can also be seen as the intersection lines between horizontal planes at different elevations and the actual ground, so contour lines are closed curves. The number marked on a contour line indicates the elevation of that contour line. A map that uses contour lines to represent the undulations and elevations of the terrain. On the same contour map, the higher the ground, the greater the number of contour lines. Where the contour lines are densely packed, the slope of the terrain is steep. Wherever contour lines coincide, there must be a cliff. If the contour lines form smaller closed curves, the area is a peak, depression, or small island. When the contour lines gradually bulge outward from the mountain peak, they form a ridge, and the line connecting the ridges is called the watershed line. Contours that gradually become concave toward the summit or saddle form valleys, and the line connecting the valleys is called the catchment line. The point where the convex sides of two contour lines are symmetrical to each other is called the saddle of a mountain. On a contour map, the general condition of the landform can be interpreted based on the different curvatures of the contour lines. When the contour lines form a closed shape, with the elevation being lower on the outside and higher on the inside, it indicates convex terrain (such as peaks, mountains, hilltops, etc.). When the contour lines show higher elevation on the outside and lower elevation on the inside, it indicates concave terrain (such as basins, depressions, etc.). When the contour lines are curved, the part of the contour line that curves upward represents a valley, and the part of the contour line that protrudes downward represents a ridge. When several contour lines of different elevations intersect at one point, the terrain feature at that point is a cliff, and a cliff legend is drawn on the map. A topographic feature consisting of a pair of contour lines representing a valley and a pair representing a ridge is called a saddle. Areas where contour lines are densely packed indicate steeper slopes, while areas where contour lines are more spaced out indicate gentler slopes. III. Functional Description (Technical Plan) The exhibit allows visitors to use sand to construct various mountain and river landforms on the sand table and observe the changes in the projected patterns. This vividly and intuitively introduces visitors to knowledge related to contour lines. IV. Operating Instructions Use sand to create terrain of varying elevations, observe the landform features formed under the projected image, and learn about contour lines. V. Overall 3D Color Rendering of the Exhibit (The attached drawings are in CAD 2010 format and 3D MAX 2012 format). It is built for unsupervised public use: surfaces are robust and wipe-clean, there are no loose parts, and the interface works without instruction, so a child of about six can operate it on a busy floor.

02 / How visitors use it

Interaction type: Open-ended, hands-on play. The unit is designed for unsupervised public use: controls are recessed or shielded, moving parts are enclosed, and the interface is operable by a child of about six with no instruction. Where a screen is used, the language can be switched without changing the hardware, and the content can be replaced on site.

03 / Built for a public floor

Every unit leaves the factory after a running test: mechanisms cycled, electronics burned in, edges dressed, fixings torqued and marked. Wear parts — bearings, sliders, lamps, belts, touch panels — are modular and listed on the spare-part sheet, so a venue technician can replace them without returning the exhibit. Crating is plywood with foam blocking; the loading plan and packing list travel with the shipment.

Same category

More in Children's Discovery

Other models from the Children's Discovery line, all held to the same specification and the same control package.

Start a project

Send us your exhibit list.
We will come back with a price.

Attach a theme outline, a floor plan, or nothing at all — a photo of the space is enough to start. Quotations are issued against a real exhibit list, not per-square-metre guesses.

Prefer to see the floor before you commit? Factory visits and third-party inspections are welcome.

WhatsApp QR code — scan to chat with Shanghai Inertia
WhatsAppScan to chat
WeChat QR code — scan to message us
WeChatScan to add us